Click to Enlarge
The ecom-J2KNpro industrial represents the ultimate design in accurate gas analysis and is unsurpassed in the field of premier portable emissions analyzers. If you have a heavy-duty testing schedule, this is the analyzer for you. In addition to holding up to 6 electrochemical sensors, the ecom-J2KNpro industrial supports an NDIR bench to measure CO2, CO up to 63,000ppm, and CH4. This allows measurement of 9 gases in one compact portable analyzer! When matched with our Advanced DAS Compliance Testing Software, the ecom-J2KNpro industrial offers complete automation of the test procedure so you can get your compliance tests done accurately and efficiently. Advanced features include stack flow velocity, NDIR bench, fresh air bypass switch, heated sensor block for thermal stability, on-board heated line power connection, dual range CO sensors for high accuracy in rich and lean conditions, and the ability to set up automatic test cycling for unattended operation.
This analyzer meets the requirements for JJJJ and ZZZZ testing. Click here for more info.
The ecom-J2KNpro industrial utilizes electrochemical sensors to measure exhaust emissions, most commonly O2, CO, NO, NO2, and SO2 gases and has an available NDIR bench for measuring CO2, high CO, and CH4. The robust filtering system along with the Peltier gas cooler and 9V high-flow pump ensures a clean sample and high flow rate, which is necessary for accuracy. The sensors have electronic monitoring which compensates for temperature changes in even the harshest testing environments, and the CO sensor has a dedicated fresh air pump which is activated if a maximum concentration limit is exceeded, usually 4000ppm. The robust sample conditioning features, high-speed flow rate, and advanced sensor monitoring make the ecom-J2KNpro industrial analyzer unmatched in accuracy and repeatability.
- Analyzer with metal chassis built in to aluminum-framed carrying case – Under case storage compartment - Handheld display for complete wireless remote control - 15-foot Teflon sample line - 1-foot Inconel probe - Consumables pack: 10-pack particulate filters, 1 spare NOx/SOx filter tube, 2 in-line filters, 1 extra roll of printer paper, vent filter pack, and 1 refill container of NOx/SOx filter media - Moisture drain tubing – T-10 torx wrench - Ambient temp. sensor stick - Calibration magnet – Antenna for base analyzer – Power cord - Padded shoulder strap - ECOM folder with Operations Manual and Calibration Certificate
1-year warranty on the analyzer and parts 18-month warranty on electrochemical sensors
The ecom-J2KNpro industrial analyzer is fully loaded with sensor options and features, which allows it to be used in many different applications around the U.S. and worldwide. These applications include emission testing on stationary engines, generators, compressors, boilers, burners, turbines, heating equipment, pumps, diesel engines, mining equipment (to control DPM), construction equipment, laboratory combustion equipment, alternative fuels research, and many other applications. The J2KN analyzer is used for fuel efficiency testing, combustion tuning, maintenance checks, and emissions compliance reporting. The types of fuel that can be tested on the J2KN Series include natural gas, oil, diesel, coal, wood, biomass, butane, propane, biodiesel, and other alternative fuels. Gasoline emissions may be tested with the ecom-J2KNpro industrial, but this requires the NDIR bench (for CO).
Gas sensor options include O2, CO, NO, NO2, SO2, Combustibles, CO2, high CO, and CH4. Temperature sensors include flue gas temperature, ambient temperature, and sensor temperature. Draft and pressure are standard measured features. A high-range CO sensor is available for rich burn applications. Also, the NO and NO2 sensors are available in "low NOx" with a resolution of 0.1ppm. Calculations include CO2, excess air, losses, combustion efficiency, O2 correction, and mass emissions in lbs/hour, tons/year, or gr/bhp.